How to deal with welding cracks in important welded joints?

Top

Categories:Company news
Author:
Origin:
Time of issue:2021-09-30 13:44
Views:

(Summary description)EMT Hydraulics was established in 2005. It is a group company that mainly integrates R&D, production and sales of compression fittings, welding joints, transition joints, hose joints, pipe clamps, flanges, quick joints and ball valves. There are 4 branches around the world: Welding cracks are important in the treatment of welded joints: Welding cracks are the most important defects in welding and the most concealed. When cracks are found in the inspection, they must be polished and removed, and then PT inspection is carried out. No problem After that, polish the surface thoroughly. If the filler metal is removed by thermal cutting, an angle grinder must be used to polish the metal on both sides of the groove by 5-10mm after removal. Therefore, it is recommended to use a mechanical method. Fill metal for removal.

How to deal with welding cracks in important welded joints?





How to deal with welding cracks in important welded joints?

Top

Categories:Company news
Author:
Origin:
Time of issue:2021-09-30 13:44
Views:

Information

EMT Hydraulics was established in 2005. It is a group company that mainly integrates R&D, production and sales of compression fittings, welding joints, transition joints, hose joints, pipe clamps, flanges, quick joints and ball valves. There are 4 branches around the world: Welding cracks are important in the treatment of welded joints: Welding cracks are the most important defects in welding and the most concealed. When cracks are found in the inspection, they must be polished and removed, and then PT inspection is carried out. No problem After that, polish the surface thoroughly. If the filler metal is removed by thermal cutting, an angle grinder must be used to polish the metal on both sides of the groove by 5-10mm after removal. Therefore, it is recommended to use a mechanical method. Fill metal for removal.

Scan the QR code to read on your phone

Previous: Obtained ABS, DNV-GL, LR "Mechanical Connector Type Approval Certificate"

Next: New equipment helps EMT to develop rapidly

Previous: Obtained ABS, DNV-GL, LR "Mechanical Connector Type Approval Certificate"

Next: New equipment helps EMT to develop rapidly

Recommended information

The development of China's hydraulic market in 2022

In April 2015, China's hydraulic industry has developed rapidly in recent years. In the past five years, the compound growth rate of the hydraulic parts market was 16.39%, accounting for about 20% of the world market, only behind the United States. Based on calculations based on the 2010 domestic market sales of 51.318 billion yuan, the sales of hydraulic parts in 2015 will exceed 100 billion yuan.

See more information

The development of China's hydraulic market in 2015

See more information

Obtained ABS, DNV-GL, LR "Mechanical Connector Type Approval Certificate"

From March to April of 2020, the domestic new crown virus has been effectively controlled, and Yimiante also ushered in a lot of good news. Our "mechanical joints" have successively obtained ABS (American Bureau of Shipping), DNV-GL Group, and LR (UK Lloyd’s Register of Shipping)’s “Type Approval Certificate”... Established in 2005, Yimiante Hydraulics is a company mainly engaged in R&D, production, and sales of compression fittings, welded joints, transition joints, hose joints, pipe clamps, Flange, quick connector and ball valve as a whole group company. Internet marketing should not be done by an independent department of an enterprise, but every department must participate in it. In other words, online marketing is more a management idea, not a simple means. Departments cooperate with each other and cooperate fully to promote each other before they can do a good job.

See more information